|
Whats to do?.........
Well, i have to hang the back of the bike from the ceiling and put it "chassis wise" on axle stands in prep for.........
Fit rear suspension (Swinging arm lift after that )
Fit an underslung rear brake caliper with a 64mm middle hole (AP racing is cheaper then Brembo)
Put the air box and tank back on, connect everything up............
Fabricate some frame to airbox conduits
Make a rear subframe "bottom" so i can place a battery and all the other electrical shite that goes under there
Retorque/copper slip/thread lock every bolt that has been undone (surprisingly, not that many)
Get/make some 5mm caliper spacers in for the front disks (310mm disks)
Get a front spindle machined up, unless i fancy dropping a shit load on Ohlins R and T forks.............Not
|
