|
Nope the cluch is going out!!!! In high gears the gear raito changes so that the torqe is on the higher end, It useally only slips in higher gears at first 3rd or higher around 6-7 rpm on hard excelaration gradualy getting wourse. I promise you thats it.
E Z to fix your self don't pay someone to do it. Just replace the fibers and when you take it apart the steel plates will most likly have burnt spots. You should replace them but if you don't want to spend the extra cash you could just lightly sand them and they should be fine. PUT THEM BACK IN THE SAME ORDER you removed them. Some of the ticknesses change.
|
