one is to open the throttle and should return under spring tension from the butterflys on the carbs... the other cable closes the butterflys... i guess if you really need to snap it shut... make sure ur cables are lubed well and check that they're routed to the proper side of the carbs... as for which goes where, if i remember the throttle open cable has a plastic elbow on the grip end that fits into the housing and the other one just slides in underneath it before the elbow goes into the killswitch housing... try to find a copy of the pdf service manual using the forum search... it takes a bit to decipher, but it shows where the cables go in there somewhere...
|
