06-09-2008, 12:49 AM
|
#18 (permalink)
|
|
Member
Joined: Mar 2007
From: ky
I Ride: zx 14
Posts: 37
|
Quote:
Originally Posted by BlueBomber14
Pulled the flies, added a BMC race filter, the full hydro formed Titanium Micron 4-2-1 system, and added the PCIII had the custom map burnt on the dyno, lowered the rear with the Yanashiki links, and stiffened the springs a tad, lowered the front end (or raised the front forks) and that's it mechanically speaking, never cracked a seal. 
Not that you can believe anything other than the raw numbers on paper but the guys at Quantum Motorsports here in Dayton said that the dyno was a little conservative compared to the one at Brocks down the road here, so as I said a grain of salt and all but if that's true figure a few more ponies might be hiden in there somewhere (sounds good to me)!! |
could you share that custom map with your pals?
__________________
I killed a case of beer,just to watch it die!! 
|
|
|
