Hello, New to the forum. Road a 1500 Classic pryer to the Concours
Just adding a few things to it, thought I would share some ideas.
GPS mount for 1" handlebars. Already had the mount so thought I would try and use it. Here is what I came up with....
Use a 1" X 4-3/4 round stock Aluminum
2 1" Aluminum spacers.
2 X 50 mm Bolts
I did it with a lathe and a milling machine. But can be done with a drill and a hacksaw.
I tried to make a $40 clamp-on cruise control work. But there was not
enough room on the bars. I needed to make a different mount. I used the throttle clamp and the small black spacer and screw.
You will need a small piece of Aluminum
A Hacksaw, Drill, File and 8/32 tap.
