Quote:
Originally Posted by 95zx6
I was wondering about this. I change my oil on my car. But I was reading the manual, it says its pretty easy, but do I really need to replace some of the washers and o rings? You have to take the oil cooler off too. Its a 95 zx-6....definitely needs an oil change. Also what kinda oil should I use, just Mobil for motorcycles or something?
I also do not have an oil filter wrench (unless it is just a socket wrench and not a specific tool) and I have no center stand....I take it that makes it difficult or what?
|
the oil cooler issue would keep me from it, for sure.
on no bike i've had since 2000 (except on busa's that needed fairing loosened to get filter out ) have you had to do anything but drain the oil, pull filter, replace filter and refill.
haven't had to replace the drain plug o-ring either, just when the nut got rounded off from using the stock tool kit. a socket wrench with a 17mm is best
