|
For a 1992:
MJ = 140 (x4)
PJ = 38 (x4)
FH = 13 ± 2mm
If you go back to stock specs, a good thing to do is to adjust the air screws at~2½ turns and shim stock needles 0.5~1 mm (0.020"~0.040"). If you use your current adjustable needles from the jet kit (OEM are not adjustable), install the clips in the 2nd (from bottom) groove.
All this is no begin with; fine tuning is usually needed for a closer to perfect mixture.
Last edited by Claude : 05-30-2008 at 10:48 AM.
|
