|
Header nuts
I have just tightened all the header nuts. I tried using long extension and swivel joint but ended up taking the panels off as I could not get to the middle two nuts. Its a bit of a chew removing the panels. The header nuts needed tightening but I would say that the nuts have not wound off, rather the seal ring (if there is one) has relaxed causing the nuts to loose tension. I probably got a turn on each nut.
Hope I dont have to do that again - yes locktite would have been the way to go.
So its had its first service,carbon hugger, fender extenda, Two Bros carbon, and Kawa Top Box fitted - now the weather is improving its fun time. The GTR is brilliant.
kev
|
