OK, so I have decided to move my original thread over here to make it easier to read. If you want to get a little background, read the original thread here:
http://www.zxforums.com/forums/zx-6r...y-farings.html
And yes,
So after weeks of waiting, I finally got my fairings that I purchased on ebay installed. A few bumps in the road (waiting for my tank to come back from paint), and finding I was missing a few pieces and such, but I am finally done.
I bought these from a company called Auctmarts on ebay. I did a lot of research and decided that this was the best company and they had a quality product. When it arrived it looked like everything was true.
So for those of you that will ask, everything seemed to be in great shape. Fairings looked the same as OEM, felt the same thickness, and seemed just the same, you would never know. Paint job was really good, only a few small minor problems of paint not being quite finished all the way to the edge. But you would never see it, it was in areas that you don't see. I only noticed because I waxed every piece before I installed it.
They came nicely packaged as seen here.
And here is them on my floor.
Pieces fit up almost perfect. The only trouble that I had was with the tail light (although I had problems with the original fairings too), and the front of the lower cowl. To fix the problem I just had to make the hole a little bigger.
Here it is completed, with the tank painted to match.
Full shot of the bike. Finally got a nice day to take it out.
Here you can see that there is a small gap between the light and the fairing. Just like the original fairings, I am going to have to glue it to keep it properly in place.
All in all, everything worked out great, and mounted up great. I'll update this later to let you know how it continues to hold up over time.
